Skip to main content
ChapterLevel 2 of 5
Chapter

72 Iron and steel

Chapter 72 is a 2-digit product group of the Harmonized System inside Section XV. Open a heading below to narrow down to the 8-digit code that matches your product, then check its GST schedule mapping and CGST/SGST split before you invoice.

29 Headings
167 Subheadings
524 HSN codes
GST slabs mapped in this chapter:
18%
IncorpX GST advisorNot sure of the exact code?An IncorpX GST advisor will help, free
Iron and steel - goods classified under HSN Chapter 72
Chapter 72 product group
One level down

Headings in Chapter 72

Each 4-digit heading is a product category. Businesses with turnover up to Rs. 5 crore report this 4-digit level in GSTR-1.

7201Pig iron and spiegeleisen in pigs, blocks or other primary forms 4 codes 7202Ferro-alloys 25 codes 7203Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or the like; iron having a minimum purity of 99.94%, in lumps, pellets or similar forms 2 codes 7204Ferrous waste and scrap; remelting scrap ingots of iron or steel 10 codes 7205Granules and powders, of pig iron, spiegeleisen, iron or steel 10 codes 7206Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading no. 7203) 9 codes 7207Iron or non-alloy steel; semi-finished products thereof 15 codes 7208Iron or non-alloy steel; flat-rolled products of a width of 600mm or more, hot-rolled, not clad, plated or coated 62 codes 7209Iron or non-alloy steel; flat-rolled products, width 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated 32 codes 7210Iron or non-alloy steel; flat-rolled products, width 600mm or more, clad, plated or coated 16 codes 7211Iron or non-alloy steel; flat-rolled products, width less than 600mm, not clad, plated or coated 32 codes 7212Iron or non-alloy steel; flat-rolled products, width less than 600mm, clad, plated or coated 15 codes 7213Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils 11 codes 7214Iron or non-alloy steel; bars and rods, not further worked than forged, hot-rolled, hot drawn or hot-extruded, but including those twisted after rolling 9 codes 7215Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72 6 codes 7216Iron or non-alloy steel, angles, shapes and sections 16 codes 7217Wire of iron or non-alloy steel 17 codes 7218Stainless steel in ingots or other primary forms; semi-finished products of stainless steel 4 codes 7219Stainless steel; flat-rolled products of width of 600mm or more 53 codes 7220Stainless steel; flat-rolled products of width less than 600mm 20 codes 7221Stainless steel bars and rods, hot-rolled, in irregularly wound coils 4 codes 7222Stainless steel bars and rods, angles, shapes and sections 26 codes 7223Stainless steel wire 4 codes 7224Alloy steel in ingots or other primary forms, semi-finished products of other alloy steel 7 codes 7225Alloy steel flat-rolled products, of a width 600mm or more 23 codes 7226Alloy steel flat-rolled products, of a width of less than 600mm 33 codes 7227Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils 9 codes 7228Alloy steel bars, rods, shapes and sections; hollow drill bars and rods, of alloy or non-alloy steel 27 codes 7229Wire of other alloy steel 23 codes
Rate disclaimer

GST rates shown here are as published in HSN to GST code and GST rate schedule mapping (as published 30.06.2017) and are reproduced for reference. The GST Council revises rates through notifications, including the slab rationalization effective 22.09.2025 that moved many goods from the 12% and 28% slabs. Always verify the current rate on the CBIC GST rates page or CBIC tax information portal before invoicing or filing. Rates shown exclude any applicable compensation cess. IncorpX provides assistance for GST registration and return filing if you need help.

Chapter 72 questions

What does HSN Chapter 72 cover?

Chapter 72 covers iron and steel. It contains 29 headings and 524 8-digit HSN codes.

Can I quote just the chapter number 72 on an invoice?

No. GST reporting needs at least the 4-digit heading (turnover up to Rs. 5 crore) or the 6-digit subheading (above Rs. 5 crore), and customs documents need all 8 digits. Use the chapter only to navigate to the exact code.

What GST rates apply in Chapter 72?

The schedule maps codes in this chapter to 18% slabs, depending on the exact product. Open a code page for its specific rows and CGST/SGST split, and verify the current rate on the CBIC GST portal before filing.

Do I need GST registration to sell goods from Chapter 72?

GST registration is required once your aggregate turnover crosses the threshold that applies to your state and supply type, or earlier for activities like inter-state supply or selling through e-commerce operators. IncorpX provides assistance for GST registration and can help you check whether the requirement applies to your business.

IncorpX business advisorHSN & GST advisorOnline now, free help

Not sure this is the right chapter for your product?

Share what you sell and an IncorpX advisor will help you confirm the correct HSN code and the GST treatment that applies, before you invoice or file. Free, with no obligation. IncorpX provides assistance for GST registration and return filing; applications are always filed in your name with the tax authorities.

GST registration assistance
Latest from our Blog & Guides

Recent Articles & Guides

Stay informed with our latest insights on business, compliance, and growth strategies.

Newsletter

Stay ahead on compliance, tax & business updates

Crisp, expert-curated insights delivered to your inbox. Once a month, no spam.

Joined by 15,000+ founders & business owners

  • 100% privacy
  • 1 email / month
  • Unsubscribe anytime
Contact IncorpX
Chosen by 15,000+ Entrepreneurs

Get Expert Guidance for Your Business

Fill out the form and our team will connect with you to understand your requirements and recommend the best way forward.

Free Consultation No Obligations Expert Advice
FREE ConsultationGet Started @ ₹299 ₹0

Talk to Our Experts

Talk to our business executives in minutes

Instant Response 100% Confidential Expert Advice
FREE ConsultationGet Started @ ₹299 ₹0

Request a Free Quote

Talk to our business executives in minutes

Instant Response 100% Confidential Expert Advice